home *** CD-ROM | disk | FTP | other *** search
- IC24AT.10
-
- I received the following mods for 24AT out-of-band from a very reliable
- source (although they don't specify RX only or RX/TX), for 75-195 MHz,
- 200-490 MHz, and 740-960 MHz. Rumor has it (unconfirmed) that the unit
- even switches to AM in the air band!
-
- 1. Remove diode D8 [see figure below]
-
- 2. Attach diode D7 [I believe this is already equipped]
-
- 3. Attach diode D12
-
- 4. Remove diode D13
-
- 5. Simultaneously hold "LIGHT", "B", and "#" keys and turn the
- power on. Release all keys after the display goes out (checks
- all LCD segments). [This is supposed to enable the
- out-of-band frequencies above]
-
- 6. Simultaneously hold "LIGHT" and "2" keys and turn the
- power on. This enables the 10 MHz frequency digit entry.
-
- 7. Simultaneously hold "LIGHT" and "3" keys and turn the
- power on. This enables the 100 MHz frequency digit entry.
-
- __________________
- | |
- | |
- | |
- | CPU |
- | |
- | |
- | |
- |________________|
-
- o o o D7 lower left pin is
- [D7] [D8] anode of one diode,
- o o o lower right is cathode
- of the other. Top pin
- o o is common
- [D12]
- o D12 upper pins are cath-
- odes of diodes, lower
- is common anode.
-
- __I_ __I_ See text
- | | | |
- D13 |__| | | D?
- |/\| | |
- | | | |
- |__| |__|
- I I
-
- WARNING: I have NOT tried the hardware mods and cannot vouch for them, so
- proceed at your own risk!
- CONTINUED IN IC24AT.11
-